RESITRIX® FG 35 Primer
FG 35 primer is a solvent containing primer based on synthetic rubber and resins. It’s used in combination with self-adhesive RESITRIX® EPDM waterproofing membranes and ALUTRIX® vapour barrier membranes on a wide variety of substrates.
With a drying time of just 35 minutes, the FG 35 surface primer is still unbeaten especially with some test results showing times for alternative primers of almost 5 hours to dry and still not being as dry as the FG 35 surface primer.
%3Aformat(webp)%3Aquality(75)&w=3840&q=75)
%3Aformat(webp)%3Aquality(75)&w=3840&q=75)
%3Aformat(webp)%3Aquality(75)&w=3840&q=75)
%3Aformat(webp)%3Aquality(75)&w=3840&q=75)
%3Aformat(webp)%3Aquality(75)&w=3840&q=75)
Areas of application & installation of RESITRIX® FG 35
The substrate must be dry, clean and free from dust and grease. Stir the FG 35 surface primer well before use. The application temperature is between +5 °C and +35 °C. Do not dilute the primer.
Apply FG 35 thinly and evenly on one side and, depending on the application area, either across the entire surface or in places using a sheepskin roller, a brush, a spray canister or a spray can.
If using on metal, prior degreasing using G 500 cleaner is required. Remove any flaking paint and areas of corrosion. In the case of transitions to bitumen membranes, any grit present on the top surface must be carefully swept off and removed to the greatest possible extent.
After the FG 35 solvents have evaporated, the self-adhesive membranes are applied into place. The evaporation time depends on the ambient temperature, the thickness applied, the type of application and the absorption of the substrate, and takes around 35 minutes.
APPLICATIONS For priming substrate surfaces for self-adhesive RESITRIX® waterproofing membranes on:
metallic substrates
bituminous materials
timber/timber materials
solid materials
plastics (except soft PVC)
Insulation boards (apart from unfaced EPS foam boards)
For priming substrate surfaces for ALUTRIX® 600 self-adhesive vapour-barrier membranes on bituminous materials, timber materials and solid materials.
If your application is not stated, please contact our Technical Department.
FG 35 Surface priming for convenient application and fast drying
Technical Data
| BASIS | Synthetic rubber + resins, contains solvents | |
| COLOUR | Black | |
| CONSISTENCY | Liquid applies easily and can be sprayed | |
| DENSITY | Approx. 840 kg/m3 | |
| VISCOSITY | 900 mPas | |
| SOLIDS | 35% | |
| CONSUMPTION DEPENDING ON SUBSTRATE | Approx. 300 g/m2 (for full-surface application) |
RESITRIX® Accessories
With RESITRIX® accessories, all components are compatible with each other to make complex detailing simple and durable.
RESITRIX® FG 35 primer stockist
With the simple dealer search, you can quickly and easily find a stockist in your area as well as the CARLISLE® specialist adviser
%3Aquality(75)&w=3840&q=75)
%3Aquality(75)&w=3840&q=75)
%3Aquality(75)&w=3840&q=75)
%3Aquality(75)&w=3840&q=75)