HERTALAN® KS205 Spray Adhesive
HERTALAN® KS205 pressurised canister spray system is ready to use contact adhesive. It can be sprayed directly without the need for a compressor or power supply when using the appropriate spray gun and hose.
This spray-applied contact adhesive has been developed for adhering HERTALAN® EPDM membranes on vertical or horizontal surfaces such as timber, bitumen, masonry and suitable faced rigid thermal insulation boards.
%3Aformat(webp)%3Aquality(75)&w=3840&q=75)
%3Aformat(webp)%3Aquality(75)&w=3840&q=75)
%3Aformat(webp)%3Aquality(75)&w=3840&q=75)
%3Aformat(webp)%3Aquality(75)&w=3840&q=75)
%3Aformat(webp)%3Aquality(75)&w=3840&q=75)
Properties and Installation
HERTALAN® KS205 is a contact adhesive that can be sprayed (applied to both sides) in a disposable pressurized canister or spray can for use on horizontal and vertical surfaces. A compressor and/or a power connection are not required. Before applying the HERTALAN® KS 205 adhesive, the substrates must be level, clean, dry and free of oil/grease. Caution: HERTALAN® KS205 is not suitable for use on cold-bonded seams.
Fast and convenient application
The sprayable variant for contact adhesive
Effective in some hard-to-reach areas
Fast and efficient in large areas
Available in pressurized containers (disposable) of 14.4 kg or aerosol cans of 750 ml
Technical Data
| Properties | Value |
|---|---|
| Type of product | Contact adhesive, solvent-based |
| Colour | Yellow |
| Flashpoint | < 0 °C |
| To blend with water | No |
| Shelf life | 12 months, provided that the adhesive is kept in the original unopened can |
| Verbrauch | mind. 250 g/m² |
| Packaging | Spray can 750 ml / Pressure Canister 14.4 kg |
